防紫外线驾驶镜蛤蟆镜偏振轴位测试机/驾驶镜蛤蟆镜偏光测试仪
防紫外线驾驶镜蛤蟆镜偏振轴位测试机/驾驶镜蛤蟆镜偏光测试仪
偏振轴位测试仪技术参数
1.讀數度盤:-15-+15°
2.最小讀數:1°
3.光源:鈉燈(589nm)
4.外形尺寸:27×37×34 CM(長×寬×高)
5.重 量:10 Kg
6.輸入電壓:AC100~240V 50/60Hz
1.將正確之電源送上,將電源開關打開即可。
产品优点:此产品可替代意大利 LEMA PA1 产品
Technical parameters of polarization axis tester
1 reading dial: -15-+15 degrees
2 minimum reading: 1 degrees
3 light source: sodium lamp (589nm)
4 dimensions: 27 x 37 x 34 CM (L * w * h)
5 weight: 10 Kg
6 input voltage: AC100~240V 50/60Hz
Polarization axis tester
1 the correct power supply, the power switch can be turned on.
2 will be required to test the glasses, fixed in the test position; that is, before the light source, up and down the 2 plastic fixture position. This fixture can adjust its angle, the angle must be adjusted according to the different radian of the frame, the adjustment must be parallel to the two light sources, and the front and back of the eye must be the same.
3 test glasses after fixation test from the rectangular machine front top type observation hole, the test in the semicircle and the lower semicircle light source brightness is the same; if different, to adjust the two light source below the handle, the brightness of its two light source under the same, the same look above the light source the two pointer refers to each for a few degrees, that is the test results.
Product advantages: This product can replace Italy LEMA PA1 products
- 推荐信息
- 管材静液压试验机(XGY-16) 管材耐压试验机、恒温介质箱、夹具
- 冲击检测设备,冲击测试机,冲击检测仪
- 美国Taber5135耐磨试验机
- HZ-ZRRY灼热燃油试验机
- 四川成都微机屏显液压万能试验机100KN/300KN/600KN
- 净水器水锤试验机 净水器成套检测设备 压力桶静压爆破试验机
- 管材水压爆破试验机 石油管耐压测试机 胶管高温爆破试验台
- DCJ-8型数显标准测力仪 0.3级标准测力仪
- 供应JB-300B半自动冲击试验机,摆锤冲击试验机
- 北京温度循环环境应力筛选测试服务机构
- 滚筒跌落试验机 线材滚筒跌落试验机 手机滚筒跌落试验机
- 苏州数控液压机厂家,昆山数控压装机现货
- 橡胶疲劳龟裂试验机-橡胶疲劳试验机-橡胶屈挠龟裂的测定
- 200吨电液式水泥压力试验机数显式压力机
- 广东江门微电脑皮革抗破器厂价/KD皮革龟裂试验机销售