品牌：欧莱斯
一.  产品名称: PU自干漆  双组份自干油漆  聚氨酯亮光油墨 平光油墨 哑光油墨 
二．主要特性：
高级自干油墨，漆膜坚硬、柔韧光亮丰满，保护性及遮盖力特佳，机械性强，颜色鲜艳持久 由多种改良耐候树脂组成，高品质，遮盖力强。优良的附着力及层间密着性，为涂装作了物理性能的良好基础。
三．产品特征:
1.饱满度光亮度优异;
2.颜色鲜艳、遮盖力特佳;
3.耐候性、耐黄变性好、耐酸碱性优异;
4.干燥速度快,流平性佳;
5.施工性能好,不易受高温潮温天气影响.
四．施工参数：
1.预涂底材必须除去尘土、油污、锈蚀。
2.调配喷涂前应严格按照标签标示的比例调配。用多少配多少，以免成浪费。
施工比例：油漆：固化剂：稀释剂=2：1：2
3.地心力喷枪（上壶）直径1.5-1.7mm,压力0.4-0.6Mpa，建议涂装2道。  
4.本产品喷涂后常温2-4小时可干燥，实干12-24小时。
五．贮存于运输：
产品在运输中应防止雨淋、日光曝晒，应存放在阴凉、干燥、通风的库内，并防止日光直接照射，隔绝火源，远离热源。
六．规格及保质期：
产品在封闭原包装的条件下，贮存期自生产完成并检验合格之日起为一年。
Brand: oleser
Product Name: PU. A self dry paint two-component polyurethane paint dry matte ink ink light ink light
Two. Main characteristics:
The advanced self drying ink is hard, flexible, bright, plump, protective and covering. It is strong in mechanical and colorful. It is made of many improved weather resistant resins, and has high quality and strong covering power. The good adhesion and interlayer density are the good basis for the physical properties of the coating.
Three. Product characteristics:
1. full degree of light is excellent;
2. bright color and excellent cover force.
3. weathering resistance, yellow denaturation and excellent acid and alkaline resistance.
4. the drying speed is fast and the flow leveling is good.
5. good construction performance, not easy to be affected by high temperature and temperature weather.
Four. Construction parameters:
1. pre coating material must remove dust, oil and rust.
2. before spraying, the spraying should be made in strict proportion to the proportion indicated by the label. How much to use, so as not to be a waste.
Construction ratio: Paint: curing agent: diluent =2:1:2
3. geocentric gun (upper pot) diameter 1.5-1.7mm, pressure 0.4-0.6Mpa, it is recommended to paint 2.
4. this product can be dried at normal temperature for 2-4 hours after spraying, and dry for 12-24 hours.
Five. Stored in transport:
Products should be prevented from rain and sun exposure during transportation. They should be stored in a cool, dry and ventilated storehouse, and prevent direct sunlight exposure, so as to keep away from fire sources and away from heat sources.
Six. Specifications and warranty period:
Under the condition of closed original packing, the storage period is one year from the date of completion of production and the date of inspection.