进口高温电磁阀(不锈钢/铜/超高温)美国斯克SRK
进口高温电磁阀(不锈钢/铜/超高温)美国斯克SRK
SRK原装进口高温电磁阀总代理:深圳市鼎机阀门有限公司---电话:15817443889 手机:15817443889 QQ:1928728284
进口SRK高温电磁阀(不锈钢/铜/超高温)系列,阀芯均为特殊耐高温、耐磨材料制作,特制线圈,超高温外采用散热的结构方式。
广泛应用于船舶重工、检测设备、加热设备、液压设备等高温导热系统中。
高温阀——t 大于450℃的电磁阀
中温阀—120℃小于 t 小于450℃的电磁阀
常温阀——40℃小于 t 小于120℃的电磁阀
Imported high temperature solenoid valve (stainless steel/copper/ultra high temperature) Ussk SRK
SRK imported high-temperature solenoid valve distributor: Shenzhen Dingji Valve Co., Ltd. --- Tel: 15817443889 Mobile: 15817443889 QQ: 1928728284
Imported SRK high-temperature solenoid valve (stainless steel / copper / ultra-high temperature) series, the valve core are special high temperature, wear-resistant materials, special coil, ultra-high temperature outside the use of heat dissipation structure.
Widely used in ship heavy industry, testing equipment, heating equipment, hydraulic equipment and other high-temperature thermal systems.
High temperature valve - solenoid valve with t greater than 450°C
Medium temperature valve - 120 °C less than t less than 450 °C solenoid valve
Normal temperature valve - 40°C less than t solenoid valve less than 120°C
进口高温电磁阀(不锈钢/铜/超高温)美国斯克SRK
SRK不锈钢高温电磁阀
阀体、阀芯均为特殊耐高温、耐磨不锈钢材质制作,特制线圈,广具有防潮、**特性,选用螺纹或法兰连接方式,工作方式可选常开或常闭控制,
额定电压为 DC12~127V或AC36~380V,其他电压可定制,其性能稳定,可靠性极高。
SRK高温电磁阀技术参数:
控制方式:常开式、常闭式
动作方式:直动型,分步直动型,先导活塞型
标准电压:380,220,110,24VAC~220,110,24,12VDC
线圈工作温度:<+50℃、<+85℃
流通流体介质:水、气、油等高温流体
流通压力:0-1bar,10bar,16bar,25bar,40bar,64bar,100bar
流体温度:+100℃,+200℃,+300℃,+400℃,+500℃,+650℃
阀体材质:不锈钢(304、316、316L)、铸钢
连接方式:螺纹、法兰、焊接
泄 漏 量:零泄漏
产 地:美国
产品品牌:美国斯克(SRK)
Imported high temperature solenoid valve (stainless steel/copper/ultra high temperature) Ussk SRK
SRK stainless steel high temperature solenoid valve
The valve body and the valve core are made of special high-temperature resistant, wear-resistant stainless steel materials, special coils, wide moisture-proof, ** characteristics, the choice of thread or flange connection, the work mode can be normally open or normally closed,
Rated voltage DC12 ~ 127V or AC36 ~ 380V, other voltage can be customized, its stable performance, high reliability.
SRK high temperature solenoid valve technical parameters:
Control method: normally open, normally closed
Action mode: direct-acting, step-by-step, pilot piston type
Standard voltage: 380,220,110,24VAC~220,110,24,12VDC
Coil operating temperature: <+50°C, <+85°C
Flow medium: high-temperature fluids such as water, gas, and oil
Pressure of circulation: 0-1bar, 10bar, 16bar, 25bar, 40bar, 64bar, 100bar
Fluid temperature: +100°C, +200°C, +300°C, +400°C, +500°C, +650°C
Body material: stainless steel (304, 316, 316L), cast steel
Connection method: thread, flange, welding
Leakage: Zero leakage
Origin: United States
Product Brand: SKK (SRK)
进口高温电磁阀(不锈钢/铜/超高温)美国斯克SRK
进口超高温电磁阀注解:1、流体中若含有杂质,电磁阀进端必须安装过滤阀(30——80目/寸),且无凝固及结晶现象。
2、电磁阀安装方位无限制。(S-水平安装、C-垂直安装)
3、反向压差时请在阀后安装止回阀。
4、以上参数根据工况要求进行选择。
Imported high temperature solenoid valve (stainless steel/copper/ultra high temperature) Ussk SRK
Imported ultra-high temperature solenoid valve Note: 1, if the fluid contains impurities, the solenoid valve must be installed at the end of the filter valve (30 - 80 mesh / inch), and no solidification and crystallization.
2, solenoid valve installation position without limit. (S-horizontal, C-vertical)
3. Install a check valve behind the valve when there is a reverse pressure difference.
4. The above parameters are selected according to operating conditions.- 推荐信息
- v形12缸北方重工TR100燃油电磁阀总承3096857
- 台湾AIRTAC亚德客电磁阀V1-06 3V1-08厂家价格
- 诺冠VCB22系列工业自动化行业电磁阀
- 分流阀FDT3-08-100/FDT3-12-200日本高美精机
- 燃气厨具微电脑控制器、燃气炒菜炉点火器电磁阀
- TO250A-柴油发电电焊机
- 自动电子排水器
- 筌达电磁阀品质,筌达电磁阀价格
- HAST-450高压加速老化试验机
- 北京防尘防水检测报告第三方检测服务
- 上海宝山区杨行小便池故障检修 电磁阀更换
- 大量回收全新电磁阀湖南本地回收工控设备PLC回收伺服电机整套
- 日本NEW ERA电磁阀,日本进口电磁阀NEW ERA 电磁阀
- 原装进口意大利CEME电磁阀
- 上海闸北区大便器维修 小便池电磁阀更换58330624